1. Qualifications for personnel entering the clean room of the clean room:

1. Personnel who have passed the training and are inspected by the supervisor can enter the clean room of the clean room.

2. Personnel entering the clean room refrigeration room shall comply with the safety regulations of the clean room refrigeration room.

3. Those who have not yet been recognized and foreign guests who have to enter the clean room of the clean room should notify the production department or be accompanied by the person in charge of the commercial department and the person in charge of the production department.

4. Unauthorized personnel are strictly prohibited from entering the clean room refrigeration room.

Second, before entering the clean room refrigeration room:

1. Employees and foreign guests entering and leaving the clean room refrigeration room must be accompanied by relevant personnel.

2. Anyone who enters the dust-free workshop refrigeration room to work or visit must change to wear clean clothing as required.

3. Do not bring personal items (handbags, books, snacks, etc.) and tools used in the non-dust-free workshop refrigeration room into the clean room refrigeration room; the manuals and tools for maintenance should be returned immediately after reuse.

4. When the material enters the clean room of the clean room, it needs to be unpacked and wiped out outside, and placed in the air shower room of the cargo to be brought into the clean room of the clean room.

5. Do not eat, drink, scream, or engage in other production-related matters in the clean room of the clean room.

Third, enter the clean room refrigeration room program:

1. When you step onto the floor of the shoe changing area, you must take off your outer shoes.

2. The outer shoes are placed in the general shoe cabinet; enter the dressing room to change into the clean clothes, and enter the air phoenix room into the workshop according to the regulations.

3. In the air and air shower room, no more than 4 people can enter at the same time. The limit of entering the clean room is 2, and the room with 4 clean rooms.

4. In order to avoid affecting the normal circulation and dust removal effect, personnel should not lean on the door or wall of the air shower room; personnel must stand on the dust pad in the center of the air shower room and shake the hands slightly by 360 degrees to help the dust fall.

5. The direction of the wind nozzle should be blown downwards. Do not arbitrarily adjust the direction of the adjusted nozzle to achieve a large dust removal effect.

6. The hair must be covered in a dust-free cap and a hair hood can be used if necessary.

7. The mouth and nose must be covered in the mask. The mask should be discarded after use and should not be reused; the hair must be placed in a clean clothing.

8. Clean clothing wearing procedures: (1) masks (2) dust-free clothing (3) dust-free shoes. Wear dust-free clothes, wear a mask, a dust-free cap, pull on a dust-free zipper, and wear dust-free shoes to ensure that the clothes are neat and then enter the dust-free workshop.

4. Precautions for the clean room in the clean room:

1. Paints or articles entering the clean room of the clean room must be cleaned by air.

2. It is strictly forbidden to write and mark on the equipment.

3. Avoid using tape to attach paper to the machine.

4. When using an air gun, it must be placed in the dust extraction vent to prevent dust from contaminating the product.

5. Waste disposal:

1. All waste and used chemicals should be disposed of and dumped in the manner specified.

2. Keep it clean and tidy at all times. Do not leave garbage to others. Do not throw gloves, finger cots and waste. It should be placed in the trash can.

3. Do not mix acid and organic solvents to avoid explosion.

4. The organic waste solvent should be stored in a special container and not poured into the drainage system.

Sixth, other matters needing attention:

1. Do not walk back and forth in the cooling room of the clean room.

2. Non-essential personnel are prohibited from staying in dust-free areas.

Jiangsu Jincheng Air Conditioning Engineering Co., Ltd. focuses on:

Industrial air conditioners, chemical fiber industrial air conditioners, chemical fiber industry refrigeration, textile industry air conditioners, clean room refrigeration, ventilation ducts, cooling towers, refrigeration machines and other air conditioning units and accessories.

If you want to know more about the product, please contact: Mr. Song 13705113637 Website: http://www.taocunbao.cn/