Textile industry air conditioning is mainly to create suitable temperature and humidity and air quality conditions for the textile workshop, how to create a comfortable environment for the textile industry air conditioning?

Return air is mixed with fresh air

The air conditioning system of the textile industry will extract a part of the return air in the workshop, and introduce a certain proportion of outdoor fresh air. The use of return air can reduce energy consumption, because the treated return air temperature and other parameters are relatively small differences from the parameters required by the workshop. The introduction of fresh air is to ensure the freshness of the air in the workshop and avoid deterioration of air quality. For example, in the textile workshop, according to the number of personnel in the workshop, the heat and harmful gases emitted by the equipment, the proportion of fresh air and return air is reasonably determined, and the proportion of fresh air is generally about 10%-30%.

This part of the mixed air enters the air conditioning unit for subsequent treatment.

Filtration treatment

The mixed air first passes through an air filter. The filter can remove impurities such as dust and fiber flecks from the air. In the textile workshop, fiber flyers are one of the main pollutants, and these impurities will adhere to the textile if they enter the workshop, affecting the quality of the product. There are many types of filter materials for air filters, such as non-woven fabrics and glass fiber filter paper. Non-woven filters can intercept larger particles of impurities, while glass fiber filter paper filters have a stronger ability to capture small particles, and can filter out dust and flying flowers with a particle size of a few microns or even smaller.

Heat and moisture treatment

Heating treatment: When the ambient temperature of the workshop is low and the temperature needs to be increased, the heater in the air conditioning system will play a role. Heaters generally use hot water or steam as heat medium.

Cooling treatment: In the summer or when the workshop temperature is high, the air needs to be cooled. The cooler in the air conditioning system reduces the air temperature by absorbing heat from the evaporation of the refrigerant. For example, commonly used refrigeration working substances such as freon or new environmentally friendly refrigerants evaporate in the evaporator of the cooler, absorbing the heat of the air and reducing the air temperature. At the same time, when the air temperature is lowered below the dew point temperature, the water vapor in the air will condense into water droplets, thus achieving the effect of dehumidification.

Humidification treatment: In the case of too dry air, it is necessary to humidify. There are many ways to humidify, such as using a steam humidifier to directly inject steam into the air to increase the moisture content of the air. According to the definition of humidity and the ideal gas equation of state, it is possible to determine how much steam can be added to achieve the desired humidity. For example, in the workshop environment with low relative humidity, by controlling the valve opening of the steam humidifier and adjusting the amount of steam injected, the workshop air humidity is maintained in the appropriate range, and the relative humidity requirements of the general textile workshop are about 60%-70%.

Dehumidification treatment: In addition to cooling dehumidification, moisture absorbent dehumidification can also be used. Certain solid absorbent agents (such as silica gel) or liquid absorbent agents (such as lithium chloride solution) can absorb moisture from the air. When air flows through a device equipped with a hygroscopic agent, water is absorbed by the hygroscopic agent, thereby reducing the moisture content of the air.

Industrial air conditioning, chemical fiber industrial air conditioning, chemical fiber industry refrigeration ,textile industrial air conditioning , dust-free workshop cooling, ventilation pipeline, cooling tower, freezer and other air conditioning units and accessories.

Jiangsu Jincheng Air Conditioning Engineering Co., Ltd. is a comprehensive manufacturer of special air-conditioning equipment design, production, installation, and commissioning of clean room, electricity, tobacco, civil air defense engineering, medical clean room, clean room, electricity, tobacco, civil air defense engineering, medical clean room. Mainly produce JCZK combined air conditioning unit, cooling tower, glass steel ventilated galvanized sheet pipe, stainless steel pipe, polyurethane ventilation pipe and air conditioning accessories, Jincheng air conditioner is wide, the type, the unique model, superior performance, and user Favused.