During this time, many provinces and cities are snowing. In the cold winter, only air conditioning can comfort us. For the rest of the life, air conditioning will be a very important thing for us. Whether it's a home air conditioner or an industrial air conditioner, we need to know a few key points about it. Today, Jincheng has collected some important points for setting up industrial air conditioners. Let me introduce them in detail below.

(1) The material of the air supply pipe is generally galvanized plate (commonly known as white iron), and glass fiber reinforced plastic, plastic air pipe, etc.;

(2) The air supply port is set at the place where the actual temperature needs to be lowered. The air volume of the air outlet is the air supply volume required for the temperature to be cooled. The air outlet size can be determined according to the air volume and the wind speed of the air outlet. The material of the air supply port can be plastic or aluminum. Alloys and other products, the outlet type of the air outlet can be used in various forms according to the actual situation. It is recommended to select the special air nozzle for environmental protection air conditioner. The average flow velocity of the air outlet throat is controlled at 3-6m/s (the recommended flow rate is 4-5m/s);

(3) The specification of the air supply duct is generally designed by the assumed flow rate method, the main air duct is maintained at 8-10 m/s, the air duct is 6-8 m/s, and the end air duct is maintained at 4-6 m/s;

(4) The designed air duct generally requires economical and low wind resistance and noise, so that the air supply volume of the environmental protection, energy saving and environmental protection air conditioner is as large as possible, and the bending radius of the air duct is generally not less than twice the diameter of the air duct. To reduce the resistance of the pipe ventilation;

(5) The length of the air supply duct should be designed according to the different characteristics of different types of environmental protection air conditioners;

(6) The designed piping should be straightened as far as possible to avoid unnecessary turning and branching pipes to reduce the local resistance of the pipeline;

(7) Considering the layout and economic point of view, the duct can be used without the duct, and the duct design should be as short as possible;

(8) The long pipe is designed according to the air volume to be a plurality of ducts of different specifications. The connecting pipe is connected by a variable diameter pipe. The setting of the reducing pipe should not be too much. Generally, the whole pipe does not exceed four. The length of the variable pipe is ">2 (Dd) )"to make sure;

(9) The connection between the air supply duct and the air outlet of the environmental protection air conditioner should be sealed; if the outdoor pipeline is too long, the insulation should be designed, and the indoor pipeline generally does not need to be insulated;

(10) If there is a branch pipe in the design, a valve or a baffle baffle shall be installed on the branch pipe to adjust the air volume so that the air volume of the branch pipe reaches the design value.

Jiangsu Jincheng Engineering Air Conditioning Co., Ltd. has been focusing on the research, production and development of industrial air conditioners, hoping to lead industrial refrigeration. Jincheng Industrial Air Conditioning is favored by users because of its wide variety, wide variety, unique products and superior performance.

Jincheng Industrial Air Conditioner is made with strong performance and you can trust it!